We all know that the essential work of this equipment is to replace the grease, especially in winter, injection molding machine maintenance should pay more attention to, then we will know how to choose the winter grease injection molding machine, the following small to tell you.

First of all, the choice of grease should be based on the requirements of the injection molding machine, neither in the requirements of the lower injection molding machine to use too senior oil, nor the lower level of oil used in the higher requirements of the injection molding machine, the choice of grease can be based on the manufacturer's recommendation to rise to a level, or choose synthetic oil better performance.

Secondly, you should try to choose winter and summer general-purpose oil, general-purpose oil regardless of temperature changes can maintain a more stable lubrication performance, the injection molding machine to play a better protection role.

Once again, depending on the condition of the injection moulding machine, if the machine is new or in good condition, a grease with lower viscosity, such as MYS-7 and LHL-X100-7, should be used as far as possible to make the grease flow faster and reduce the wear during start-up.

Finally, if it is in the high temperature season or if the injection moulding machine has been worn to a certain extent, you should choose a high viscosity grease, such as MY2-7, etc. This will help to form a thicker oil film, maintain the oil pressure and reduce the oil consumption.

The above is the winter grease how to choose to share.