Grease itself is not involved in lubrication, grease is the carrier of lubricating oil, he will slowly ooze lubricant to lubricate the parts that need lubrication, so the ability of grease to maintain the form is more important, this is generally called the drop point, this is a performance of grease, the following to give you the performance advantages of grease.

For grease, good permeability and adhesion is the basic requirement, but these two properties often conflict with each other, good adhesion, permeability is generally poor, good permeability, grease can be deep into the injection molding machine internal lubrication, adhesion is good, can prevent grease in the force or gravity, vibration conditions do not drip out, throw out.

Therefore, when choosing, we should evaluate the two aspects of grease performance, for example, some grease publicity is good adhesion, then we should see how its permeability, the adhesion of grease is more important, because the oil will become thin under high temperature, more likely to drip out.

1、It will not take out or form harmful impurities under high temperature and high load.

2、Grease has a longer life than ordinary synthetic grease.

3、Good oil film strength and load carrying capacity.

4、The grease has very low oil separation and superb resistance to extreme pressure.

5、Anti-acid and alkali chemical corrosion.

6、Grease has a great temperature range from -30oF to 650oF.

7、It can effectively resist salt water and most cleaning agents.

8, grease can generate a high concentration of polytetrafluoroethylene lubrication protection layer, high temperature continue to lubricate.

The above is the performance advantages of grease share, if you want to know more information about it, please pay attention to this site.