The selection of injection molding machine grease should not only consider the viscosity size, and more importantly, its quality level, and according to the requirements of the injection molding machine to choose the appropriate viscosity of grease, to protect the friction surface of the machine parts can form a sufficient thickness of the oil film, machine lubrication should be selected with a lower viscosity grease, then we know the requirements of the injection molding machine for grease?

1, injection molding machine start and work, in the current standard allowable range, grease should have anti-pressure, adhesion, oxidation resistance and noise reduction effect.

2, due to the friction parts have plastic material gear, grease base oil should choose synthetic oil.

3, in order to injection molding machine life long, plus has the effect of self-locking, the friction parts grease to have the corresponding demand.

4, injection moulding machine test to sub-working cycle, work system work 2 minutes, rest 18 minutes, the relationship between speed and load and structural design, determine the life of the injection moulding machine.

5、In order to have a long life of the injection moulding machine, plus the effect of self-locking, there should be a corresponding demand for grease for the friction parts.

6、Grease for injection moulding machine should have permanent lubrication and self-locking in the friction parts.

7, injection moulding machine test to 10,000-20,000 work cycles, work system work 2 minutes, rest 18 minutes, speed and load relationship and structural design, determine the life of the injection moulding machine.

8, grease: in the friction parts to have permanent lubrication, self-locking.

The above is the requirements of the injection molding machine for grease sharing, if you want to know more information about it, please pay attention to this site.